Categories
Recipe

SCB BBQ 2015 Beer Winner, The Recipe

SCB BBQ Winner 2015
SCB BBQ Winner 2015

Citra and Simcoe Strong Bitter
Method: BIAB / BM

Style: Pale Ale
Boil Time: 60 min
Batch Size: 18 litres (fermenter volume)
Boil Size: 25 litres
Original Gravity: 1.050
Final Gravity: 1.010
ABV (standard): 5.25%
IBU: 40.62

Fermentables

Amount               Fermentable                                   PPG          °L            Bill %
3.3 kg      United Kingdom – Maris Otter Pale              38           3.75        88.6%
0.3 kg      United Kingdom – Munich                            37           6              8.1%
0.125 kg  United Kingdom – Cara Malt                        35           17.5         3.4%
3.73 kg  Total

Hops

Amount               Variety Type         AA          Use                                       Time       IBU
20 g        Citra        Leaf/Whole         14           Boil                                    60 min    40.62
5 g          Citra        Leaf/Whole         14           Whirlpool at 90 °C            10 min
25 g        Simcoe   Leaf/Whole         12.7         Whirlpool at 90 °C            10 min

 

Mash Guidelines

Amount Description             Temp      Time
25 L         Mash                  42 C        10 min
—             Mash                  65 C        70 min
—             Mash                  73 C        10 min
—             Mash                  78 C        10 min

Categories
Articles Events

Brewing up a batch – The craft beer kitchen

Scottish Craft Brewers brew up a beer in the Stewart Brewing Craft Beer Kitchen

Well, what a day yesterday!! I felt like a kid in a sweet shop!!

15ish lads and lassies from Scottish Craft Brewers turned up to brew 3 beers, an IPA/lager, a Christmas beer and an American rye at the craft beer kitchen at Stewarts.

Boy what a welcome to get us started, the guys at the brewery shop gave us each 5 beer tokens to use on the 10 or so beers they had on tap, and if that wasn’t enough they had a cask of “hopricot” sitting in the brewing area for us to quaff away at with no supervision:)

So enough of the beer drinking onto the brewing. We had a few newcomers to the group that were chucked in at the deep end with the usual mixture of seasoned kit brewers and all grainers but they seemed to relish the challenge and within half an hour were sounding like experts.

We split into three groups and each group was allotted a member of the Stewart’s team as help and a steam powered 100-120l boiler to brew in. Then it was down to ingredients. Malt extract to measure, speciality grains to grind and hops to weigh. The bulk of sugars for these brews came from malt extract meaning  we could all get a brew in without having to hang around for 6 hours, but we steeped some grains for some extra taste and colour and added various hops (in vast quantities) to make the beer our own.

Most of us aren’t used to brewing on this scale so even simple tasks like stirring the malt into the boil was a new experience with huge mash paddles and brute strength needed.

As if all that beer and brewing wasn’t enough, onve our brews were sorted we also got a  fantastic trip around the brewery with a guide telling us the history of the company and all about the kit they use to brew. Even the seasoned brewers amongst us learned a thing or two.

So after brewing 80-100l of beer, a trip round the brewery with all the facts and being sat getting fed their beer, could say it was a great day! Need to get some more of the group out there next time and maybe do an all grain session.

By Bruce Stevenson

 

Categories
General

An update – making your own bottle labels for your home-brew beer

selection of beer labelsI thought it might be time for a quick update on what I’m doing and maybe some more hints and tips that I didn’t post last time. The blog post I did is still available if you want to have a look –

If you hadn’t read it previously I’d say go read that post and come back as there is some useful information there that will set you up to get started.

You read it? Good then lets look at some new labels and how I did them.

 

 My labels – how did I choose that design?

Brew dog labelI actually didn’t start off with that design for my bottles. I’ve gone through a whole process of trying out different labels until I found the one that got me most excited and although at the minute I am really pleased with them, they are not perfect but I’ll tell you more about that later.

My first label idea was based on the Brewdog labels. I liked the bold colours and text of the design and I liked the slightly grungy look so I had a play about with how I could recreate that kind of idea.

lager labelMy first attempt was for a coopers lager kit I did, so of course thinking of Australian lager, I made the label yellow. Looking back, it’s not a brilliant label not least because of the poor choice of yellow background with white lettering which wasn’t easy to read. Also it was a bit cluttered. I tried to put a name for the beer, details about what it looked and tasted like, the style, the percentage, a logo for my “brewery” and some information about pouring it since it had yeast in the bottle. An awful lot of info to get onto a little square of paper. Things did continue to evolve though.

I switched colours mostly, so each beer had the same label but with the background as a different colour. Red for Goblin Queen, Purple for Heather Ale etc. But I mostly stuck with this design, just adding a couple of little bits to grunge it up a bit and it worked fine for a while, all our beers had this label on them and together they looked quite cool sitting on a shelf and I was pretty proud.

 

beer lined up

 

However the grunginess and the massive amounts of text started to annoy me and I wanted something simple and bold. Something modern. So I scrapped it all and started with a blank, white square and said, “What text actually NEEDS to be there?” And the scary thing is, not as much as you think.

So I went for a very stripped down version, just a square of bold colour and the text I needed in a plain bold font. It worked out great and I am still using this idea although tweaked ever so slightly.

Bottles with new labels

 

 So how do I make the labels?

Ok, I normally use a piece of software called Fireworks to make my labels but since there are lots of free versions of graphics software out there, I’m going to show you how I would create a simple version of this label using one of the pieces of software you can get for free.

apa label

 

First download a piece of software called GIMP from this webpage and install it. http://www.gimp.org/

 Creating your label

step 1- get started

ok once you have GIMP open on your computer you need to create a new work area. Simply done, click FILE and then NEW. This gives you a choice of sizes to play with. For this label I usually make it around 500 pixel each length so I choose the template from the drop box which nearest fits this size – 640 by 480.

step 2 – draw your label outline

Click on the rectangle tool on the tool box.

step 2

 

Then drag the rectangle shape to the rough size you want.

To colour the rectangle, double click on the colour box and then choose the colour you want from the pop up window.

colour picker

Now to fill your rectangle with the colour you have chosen, click on the fill tool and then on your rectangle. I chose white but you can choose any colour you like.

fill tool

The next thing we want to do is to create the black outline around the rectangle. To do this we have to choose the background colour. On the graphic above you can see the colour boxes are red and black, red is the foreground colour and black is the background colour. You can either change the foreground colour (as you did previously) or you can switch them around by clicking the little white arrows on the top right of the colour boxes.

However you do it, for this example we want to give our rectangle a black outline so make your colour black.

Then using the menus at the top of the screen, click on EDIT, then STROKE SELECTION. It will now open the window where you can edit the outline.

stroke

 

For this example I am going to change my stroke settings to have a solid line and a line width of 1 px then click STROKE.

step 3 – draw your centre rectangles

You should now have a white rectangle with a black outline on the screen. The next thing we are going to do is add another rectangle in the middle of the first and colour it red. We do this in exactly the same way as before. Click on the rectangle tool, draw your rectangle and then use the colour picker and fill tool to colour it, in this instance red.

red square

Now you are rocking!

Right next we are going to add the white band where you put the name of your brewery. Exactly the same as before choose the rectangle tool, then draw it out where you want it and then use the colour tool and fill tool to colour it white.

 

step 4 – adding text

Now we have the basic shapes in place, we are going to add the text. Firstly the name of the beer. in the example I am calling my beer APA, for American Pale Ale.

From the toolbox, click on the bold A in the centre, this is your text tool.

text tool

As you did for your rectangles, draw out the area you want your text to go. It’s good to make it much bigger than you need for the minute, you can always make it smaller later.

Inside the space you have just drawn, double click and then type the text you want. A text tool bar will appear which will allow you to change the size or colour. Get everything as you want it by highlighting the text you just written and then using this bar to make changes.

To adjust the font or the position of the text, you can do this from the tool options on the left.

font tools

 

 

On my example I have text that looks like it has a dark shadow. I made this by having two pieces of text. One white and one black. Then I moved one on top of the other.

To move an item such as text, click on the moving tool from the tool box and then click on the item and drag it to where you want it to be.

drag tool

The other tool you need to know about is the layers toolbox. It allows you to move layers to have one on top of the other. In this case the white text on top of the black text.

The layer which you want to be on top, will be top of the list. For example, our white rectangle is the back, then next is the red one, then the black text and then the white text as this is the order we want them to appear.

layers

Adjust yours so that your text appears as you want it.

You now use this same set of tools to add your other text elements to your label and in the end you should end up with something similar to this.

simple label

 

 

step 5 – saving your graphic

Right, you’ve created a brilliant label that you are super proud of. Now you want to save it so you can print it and use it on your new beer.

The first thing you want to do is get rid of any of the excess white area (or canvas) around your graphic.

From the menu at the top of the screen, click IMAGE. Then click FIT CANVAS TO SELECTION. this will take out all the excess canvas for you.

Lastly we want to save your creation, so to do this, click FILE and then EXPORT. This will open a window where you can choose the type of file to save and give it a name. I’d recommend using the little cross on the bottom left to choose SELECT FILE TYPE and then from the list that appears choose GIF.

Now at the top, give your file a name and then click EXPORT.

image

 

By Eli Donald.